China best Mxl XL L Htd 3m 5m 8m Aluminum Alloy Timing Synchronous Automotive Rubber Poly V Transmission Belt Pulley pulley block

Product Description

INDUSTRIAL TIMING PULLEY 

.  Feature

Our Timing Belt uses Japan-imported high quality synthetic neoprene, high quality glass fiber cord and tooth surface with nylon 66 high stretch do the protection. The timing belt adapts teeth or teeth mesh to transfer power. It needs no lubrication, no slip, no pollution, less noise. The transmission efficiency is over 98%, and the speed ratio can reach 1:10. Linear velocity can be up to 50m/s. Its dynamic bending wind gives a good fatigue performance, and good aging heat-resistance abrasion performance.

. Parameters

Figure 1. Physicomechanical Property

Item  Trapezoid Teeth Arc Teeth
XL L H XH XXH 3M 5M 8M 14M 20M
Tensile Strength N/mm 80 120 270 380 450 90 160 300 400 520
Elongation Reference at Loading   N 60 90 220 300 360 70 130 240 320 410
Adhesion strength of cloth N/mm 5 6.5 8 10 12 6 10 12 15
Adhesion strength of core N/mm 200 300 600 800 1500 400 700 1200 1600
Gear shearing intensity N/mm 50 60 70 75 90 50 60 80 100
Elongation ≤ % 4%
Hardness Shore A 75 ± 5

Figure 2: Belt Teeth Size

Type Pitch (pb) mm Tooth height (ht) mm Belt thick (hs) mm Angle
MXL 2.032 0.51 1.14 40º
XXL 3.175 0.76 1.52 40º
XL 5.080 1.27 2.3 40º
L 9.525 1.91 3.6 40º
H 12.7 2.29 4.3 40º
XH 22.225 6.35 11.2 40º
XXH 31.7 9.53 15.7 40º
T2.5 2.5 0.7 1.3 40º
T5 5.0 1.2 2.2 40º
T10 10 2.5 4.5 40º
T20 20 5.0 8.0 40º
AT5 5.0 1.2 2.7 40º
AT10 10 2.5 5.0 40º
AT20 20 5.0 8.0 40º

 
. Production Equipment
01, pulley CNC processing zone                            02, synchronous belt making machine                  03, synchronous round roll teeth processing zone
04, synchornous belt curing processing zone        05, 3 roll calender                                            06, direct drive belt forming machine
07, pulley workshop timing mould

. Quality Testing
 

FAQ

Q1.  Can I have a sample order?
        Yes, any sample order is welcome to know the quality of our products.

Q2.  What about the lead time of the sample or the final order?
        2-5 days for normal sample.
        20-30 days for a formal order.

Q3. How much is the minimum quantity for each item in 1 order?
       One mould quantity is ok. Usually around 100pcs for small item, several dozens for big item. 

Q4. Is it possible to print our logo or brand on the belt?
       Yes, we can print your logo or design on the belt after receipt of your formal authorization        letter of the logo or your brand.

Q5. Do you offer the guarantee for your product?
       Yes, usually we offer 1 year warranty for all of our products.

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Standard or Nonstandard: Standard
Application: Electric Cars, Motorcycle, Car
Feature: Wear-Resistant, High Temperature-Resistance
Tensile Strength: Strong
Material: Rubber
Type: Toothed Belt
Samples:
US$ 0.1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

xl pulley

How do XL pulleys compare to other pulley types, such as HTD or V-belt pulleys?

XL pulleys, HTD pulleys, and V-belt pulleys are all popular types of pulleys used in mechanical systems. Here is a detailed comparison of XL pulleys with HTD and V-belt pulleys:

1. Tooth Profile:

XL pulleys and HTD (High Torque Drive) pulleys both utilize toothed belts for power transmission. The main difference lies in their tooth profiles. XL pulleys have trapezoidal teeth, while HTD pulleys have a curvilinear tooth profile. V-belt pulleys, on the other hand, are designed for V-belts, which have a wider, wedge-shaped cross-section.

2. Power Transmission Capacity:

XL pulleys and HTD pulleys offer higher power transmission capacities compared to V-belt pulleys. The toothed belt designs of XL and HTD pulleys provide a positive engagement, preventing slippage under higher loads or torque. V-belt pulleys rely on friction between the belt and pulley, limiting their power transmission capacity.

3. Speed Capability:

XL pulleys and HTD pulleys are both suitable for higher speed applications compared to V-belt pulleys. The toothed belt designs allow for better grip and reduced belt slippage, enabling XL and HTD pulleys to operate at higher rotational speeds without compromising performance. V-belt pulleys are generally suitable for lower speed applications.

4. Efficiency:

XL pulleys and HTD pulleys offer higher efficiency compared to V-belt pulleys. The positive engagement between the toothed belts and pulleys in XL and HTD systems minimizes slippage and associated energy losses. V-belt pulleys, relying on friction, may experience higher energy losses due to belt slip.

5. Precision and Positioning:

XL pulleys and HTD pulleys provide better positional accuracy and reduced backlash compared to V-belt pulleys. The toothed belt systems offer improved control and synchronization, making them suitable for applications that require precise positioning or timing, such as robotics or CNC machines.

6. Noise and Vibration:

XL pulleys and HTD pulleys generally produce less noise and vibration compared to V-belt pulleys. The toothed belt systems exhibit smoother operation due to their positive engagement, reducing noise and vibration levels. V-belt pulleys may generate more noise and vibration due to potential slippage and belt oscillation.

7. Installation and Maintenance:

XL pulleys, HTD pulleys, and V-belt pulleys are all relatively easy to install and maintain. However, V-belt pulleys may require more frequent tension adjustments and periodic belt replacements due to belt wear and stretch. Toothed belt systems, including XL and HTD pulleys, often require less maintenance and offer longer belt life.

8. Application Suitability:

The choice between XL pulleys, HTD pulleys, and V-belt pulleys depends on the specific application requirements. XL and HTD pulleys are commonly used in industrial automation, power transmission, and precision machinery applications that demand higher torque, speed, and accuracy. V-belt pulleys are often employed in applications such as HVAC systems, automotive engines, and smaller machinery.

In summary, XL pulleys, HTD pulleys, and V-belt pulleys have differences in tooth profile, power transmission capacity, speed capability, efficiency, precision, noise/vibration levels, installation/maintenance, and application suitability. Understanding these differences is crucial in selecting the most appropriate pulley type for a given mechanical system and its specific requirements.

xl pulley

What maintenance practices should be followed to ensure the longevity of XL pulleys?

To ensure the longevity of XL pulleys, it is important to follow proper maintenance practices. Here are some key practices to consider:

1. Regular Inspection:

Perform regular visual inspections of the XL pulleys to check for any signs of wear, damage, or misalignment. Look for worn-out or damaged teeth, cracks, or excessive wear on the pulley surfaces. Inspect the pulleys for proper alignment and ensure that they are securely mounted.

2. Belt Tension:

Maintain the proper tension in the timing belt that is used with the XL pulleys. Incorrect belt tension can cause slippage, premature wear, and reduced power transmission efficiency. Follow the manufacturer’s guidelines or specifications to determine the correct tension for the specific application and adjust it accordingly.

3. Lubrication:

XL pulleys typically do not require lubrication as they are designed for dry operation. However, in some cases, the manufacturer may recommend specific lubrication practices for certain applications. If lubrication is required, use the recommended lubricant and follow the manufacturer’s instructions carefully.

4. Cleaning:

Keep the XL pulleys clean and free from debris, dust, or other contaminants. Regularly clean the pulleys using a soft brush or cloth to remove any build-up that may affect their performance or cause premature wear.

5. Environmental Considerations:

Consider the operating environment of the XL pulleys and take appropriate measures to protect them. In harsh or corrosive environments, use pulleys made from materials that are resistant to corrosion or degradation. Implement protective measures such as covers or enclosures to shield the pulleys from exposure to dirt, moisture, or chemicals.

6. Replacement:

If any signs of significant wear, damage, or deformation are observed during inspections, consider replacing the XL pulleys promptly. Continuing to use worn-out or damaged pulleys can lead to reduced performance, increased risk of failure, and potential damage to other components in the power transmission system.

It is important to consult the manufacturer’s guidelines and recommendations for specific maintenance practices for the XL pulleys used in your application. Following the recommended maintenance practices will help ensure the longevity, reliability, and optimal performance of the XL pulleys in power transmission systems.

xl pulley

Can you explain the key characteristics and specifications of XL pulleys?

XL pulleys have specific characteristics and specifications that are important to understand for their proper selection and use. Here are the key details:

1. Tooth Profile:

XL pulleys have a tooth profile designed to work with XL timing belts. The tooth profile is trapezoidal in shape, with specific dimensions and angles to ensure precise engagement with the corresponding teeth on the timing belt.

2. Pitch Size:

The pitch size of an XL pulley refers to the distance between adjacent tooth centers. XL pulleys have a standardized pitch size of 0.200 inches (5.08 mm). This pitch size ensures compatibility with XL timing belts of the same pitch, allowing for easy interchangeability.

3. Belt Width Compatibility:

XL pulleys are designed to accommodate XL timing belts of specific widths. The belt width is determined by the application requirements and load considerations. XL pulleys are available in various groove widths to match the corresponding XL timing belt width, ensuring proper belt engagement and power transmission.

4. Material and Construction:

XL pulleys are commonly made from materials such as aluminum, steel, or plastic. The choice of material depends on factors like the application requirements, load capacity, and cost considerations. The pulleys are precision-machined to ensure accurate tooth profiles, smooth operation, and reliable performance.

5. Number of Teeth:

The number of teeth on an XL pulley determines the speed ratio and the positioning accuracy of the motion control system. The number of teeth can vary depending on the specific application requirements and the desired speed and torque ratios.

6. Flange Options:

XL pulleys may come with flanges on one or both sides. Flanges provide additional support to the timing belt, preventing it from slipping off the pulley during operation. The presence and configuration of flanges depend on the specific application needs and the desired level of belt stability.

7. Application Range:

XL pulleys are suitable for applications that require precise motion control, such as robotics, CNC machines, 3D printers, and other automated systems. They can handle moderate to high torque requirements and operate at various speeds, depending on the specific pulley size, material, and construction.

8. Interchangeability:

Due to standardized pitch sizes and tooth profiles, XL pulleys from different manufacturers are interchangeable with XL timing belts of the same specifications. This interchangeability simplifies replacement, maintenance, and system upgrades.

Understanding these key characteristics and specifications of XL pulleys is essential for selecting the right pulley for a given application, ensuring proper power transmission, and achieving accurate motion control.

China best Mxl XL L Htd 3m 5m 8m Aluminum Alloy Timing Synchronous Automotive Rubber Poly V Transmission Belt Pulley   pulley block	China best Mxl XL L Htd 3m 5m 8m Aluminum Alloy Timing Synchronous Automotive Rubber Poly V Transmission Belt Pulley   pulley block
editor by CX

2024-04-03

Recent Posts

xl-pulley

As one of leading xl-pulley manufacturers, suppliers and exporters of mechanical products, We offer xl-pulley and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of bush chains

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.